Version history

ODM 3.4 Version History

3.4.09 Released 11h November 2008
3.4.08 Released 8th October 2008
3.4.07 Released 9th September 2008
3.4.06 Released 8th July 2008
3.4.05 Released 18 April 2008
3.4.04 Not released
3.4.03 Released 29 January 2008
3.4.02 Released 15 January 2008
3.4.01 Released 12 December 2007
3.4.00 Released 21 November 2007

 

Charts

  • 3.4.08: Fix for ODM crashing when user clicks 'Align wellsticks on depth' without selecting any data panels.
  • 3.4.08: Fix for charts disappearing from under the charts tab in the project browser.
  • 3.4.07: Fix for occasional crash if setting well stick separation when project coordinate system not defined.
  • 3.4.07: Header macros not working for interval data types.
  • 3.4.07: Vertical alignment not working for user-defined header captions
  • 3.4.07: Active page template can now be over-written.
  • 3.4.06: Macros added to user-defined headings in charts. Use $XX_min, $XX_max, $XX_units, $XX_title, $XX_caption.
  • 3.4.06: Top/base depths reversed when selecting depth limits from interval.
  • 3.4.04: Fixed spurious 'auto-save' message received after using Chart > Save as...
  • 3.4.04: Improved interface and various bug fixes for stacked log curves (can now handle more than 6 curves)
  • 3.4.04: Using a decimal point in Chart Preferences causes ODM to crash if the PC's regional settings require a comma for the decimal separator [OD87010279]
  • 3.4.04: Cross-plot no longer causes ODM to crash with a 'subscript out of range' error when plotting data for many wells. [OD87010257]
  • 3.4.04: Lithology pattern is no longer lost in tie when 'extend across panels' is left unticked.
  • 3.4.03: Improved handling of comment formatting in data panels.
  • 3.4.03: "Invalid object handle" error message (received when plotting detailed lithology infill) fixed. [OD87010239]
  • 3.4.03: Added font control on depth labels in data panels.
  • 3.4.03: Fix for problem seen in some correlation charts after upgrading to ODM 3.4.
  • 3.4.02: Crossplots no longer show unexpected data points when referencing sparsely-populated curves. [OD87010213]
  • 3.4.02: When deleting a chart template, the template preview is now also deleted. [OD87010209]
  • 3.4.01: Fix to prevent ODM crashing when attempting to open a chart without a configurable printer driver available.
  • 3.4.01: "Cannot reposition well headers based on surface seperation" error message no longer received when wells do not have long/lat surface positions specified. [OD87010185]
  • 3.4.01: Occasional (1 chance in 500) "Subscript out of range" error (IFS.GetPoly2) seen when using colour infill on large curves (>5000 points) [OD87010195]

Maps

  • 3.4.07: Added option to specify number of decimal places in the map grid labels (primary & secondary).
  • 3.4.04: New option to apply well label format to a sub-set of map wells
  • 3.4.03: Resetting map extents occasionally resulted in ODM crash when map in lat/long coordinate system. [OD87010233]
  • 3.4.02: After right-clicking a well in the map, the Well > Label options did not respond correctly. [OD87010206]

WSM Module

  • 3.4.04: Wide-ranging enhancements and bug fixes
  • 3.4.01: Production data tables listed twice under well data pop-up menu. [OD87010199]

Project maps

  • 3.4.01: Cursor arrow now points to correct region when hovering over well label or scale bar in map. [OD87010117]

OpenWorks link

  • 3.4.07: Geologic feature (pick data type) now exported to OpenWorks.
  • 3.4.06: Fixed bug in the OW link, where re-importing wellpath data may occasionally fail.
  • 3.4.06: When re-importing well headers without any other data, the ODM Well Properties may not be updated until after re-starting ODM.
  • 3.4.06: Default behaviour when importing well status is now 'prompt' (previously 'skip')
  • 3.4.04: Well coordinates (lat/long and x/y) where not importing correctly when PC's locale used a comma as the decimal separator.
  • 3.4.04: Fix for export problem with pick max depth values (seen if min value zero).
  • 3.4.02: Final Version flag for log curves occasionally applied incorrectly (it should always mark the highest version number). [OD87010218]
  • 3.4.01: Wells not correctly selected/de-selected for import if the mouse is dragged after clicking a check box but before releasing the mouse button. [OD87010190]

Importing/Exporting

  • 3.4.09: Fix for ZMap import fail with "input past end of file" and grid looks wrong on map.
  • 3.4.08: Fix for error in single-well ASCII importer when attempting to import into interval table.
  • 3.4.08: Fix for some OpenSpirit imports failing with overflow error message.
  • 3.4.08: Fix for multi-well ASCII file imports failing to import into sample data table.
  • 3.4.08: Fix for completion date field not being updated on import.
  • 3.4.07: Fix for well matcher not mapping when switch opetions between _ and / chosen.
  • 3.4.07: Fix for Import Well Headers allowing duplicate well codes into database
  • 3.4.07: Fix for Well Matcher not mapping when switch options between _ and / chosen
  • 3.4.07: Fix for IP link failure, where curves showed null or zero values only.
  • 3.4.07: Single-well export (Tops/bases) now includes option for MD.
  • 3.4.07: Fix for Single-well ASCII import fail with negative depths.
  • 3.4.07: Well matching for import including excluded wells.
  • 3.4.07: Option to reload well headers in Interactive Petrophysics import.
  • 3.4.07: RMS Export - improvements to extraction and supports more formats
  • 3.4.06: Log importer now handles Petrel well trace files.
  • 3.4.06: External ASCII grids with depths in feet were not importing correctly.
  • 3.4.06: SBUGS link now correctly determines the type of well (i.e. downhole or outcrop) and takes action accordingly.
  • 3.4.04: Importing a zmap polygon file problematic when file includes a z-column. Now fixed.
  • 3.4.04: When exporting an ODM project, selection of export folder fails if current database does not have a parent folder
  • 3.4.04: When using the Single-Well ASCII import, ODM will now accept LAS files containing ~C (rather than ~CURVE) as data block header. (The log file importer already recognises ~C).
  • 3.4.04: Export of log data to ASCII or LAS file occasionally shows NULL value at first depth point [OD87010291]
  • 3.4.04: Import of well headers no longer fails with runtime error 3021 "No current record" when importing into an empty project. [OD87010278]
  • 3.4.04: LAS file import occasionally fails when depth values are reversed and merging with existing data [OD87010273]
  • 3.4.04: LAS file fails to import when PC's regional settings use a comma for the decimal separator. [OD87010260]
  • 3.4.04: Well Symbol dictionaries are no longer deleted when 'replace' option selected on importing dictionaries (caused all existing well status information to be lost). [OD87010254]
  • 3.4.03: Fixed "Type mismatch" error generated when PC locale is continental Europe, and using multi-well import. [OD87010237]
  • 3.4.02: TVDSS values incorrect after importing wellpath using single-well ASCII loader [OD87010228]
  • 3.4.02: Type mismatch if any datum field is empty [OD87010225]
  • 3.4.02: Subscript-out-of-range error when importing deviation data in multi-well ASCII loader. [OD87010221]
  • 3.4.02: Subscript-out-of-range error when importing log curves with single depth only in Single-well ASCII loader. [OD87010215]
  • 3.4.01: IP link failed to import curves with irregular depth data. [OD87010178]
  • 3.4.01: Well header import/export options consolidated to ensure that ODM export file can be imported directly. [OD87010197]

Strat Scheme Builder + Dictionaries

  • 3.4.09: New option to import/export ODM schemes to/from the Strat Scheme Designer.
  • 3.4.07: When Dictionary Terms dialogue has only one dictionary in the drop-down list, this is selected by default.
  • 3.4.04: When cloning a dictionary, parent/surface information now retained. [OD87010280]
  • 3.4.01: Strat Scheme Builder: ODM crashes with runtime 424 'object required' error when selecting Tools > Analyse scheme... within the Strat Scheme Builder. [OD87010201]

Reports

  • 3.4.07: Units in Interval Table and Data Reports now listed in stratigraphic age order
  • 3.4.07: scroll-bar option for mouse added for browsing all Reports
  • 3.4.01: Fix to the Well Information (well history) report

Utilities

  • 3.4.07: Fix for picks-to-intervals conversion fail.
  • 3.4.07: fix for database report failing to show all wells when well names contain with upper- and lower-case characters.
  • 3.4.07: ODM crashed with SOOR when using Curves to Intervals with a filter.
  • 3.4.07: Fix for Curves to Intervals run time error 9 (SOOR) with > 30 liths.
  • 3.4.02: ODM no longer crashes when using the picks-to-intervals converter. [OD87010227]
  • 3.4.01: Overflow error generated in Intervals to Curves utility when dealing with long wells is fixed. [OD87010198]

Well queries

  • 3.4.01: Warning message now given if user attempts to select a 'log search' from the log data selector. [OD87010194]

Miscellaneous

  • 3.4.09: Fix for inaccuracies to Projections.
  • 3.4.08: Fix for wells not displaying in the well selector.
  • 3.4.07: Fix for 'Error in DataType...Do you wish to halt the program' error if DataType is zero, when clicking the Plot symbol button under the Display tab in Shape File Properties
  • 3.4.07: Fix: Users with restricted privileges can now change their passwords.
  • 3.4.07: Well reference elevation in Well Properties dialogue now displayed.
  • 3.4.07: Fix for inability to copy-and-paste between interval/tops tables when extended columns are included.
  • 3.4.07: Fix for inability to enter min/max pick depths in interval table.
  • 3.4.07: Fix for ODM crashing when an unassigned log curve is dragged to the Log Browser.
  • 3.4.07: Limit on log display was at 100,000 records, changed to 300,000.
  • 3.4.07: Added ability to 'Undo' (Ctrl + Z) everywhere in ODM.
  • 3.4.07: Curve mnemonic validation allowing invalid characters
  • 3.4.06: Data browser now handles -ve depths for outcrops correctly.
  • 3.4.06: "Object variable or With block variable not set" error no longer returned when closing maximised Log Browser window.
  • 3.4.06: Fix for 'Filename path length must be less than...' error seen when attempting to load external graphic into ODM data type.
  • 3.4.04: Windows list no longer disappears for Chart, map or data tables [OD87010299]
  • 3.4.04: Errant behaviour in well-list filter (or even occasional fatal SOOR) fixed [OD87010274]
  • 3.4.04: Search-and-replace now working for Operator field in Wells Browser
  • 3.4.04: New Dictionary dialogue no longer opens behind the Graphics Dictionaries form.
  • 3.4.04: In data table, flag empty data types within drop-down list. If last-selected data type is empty, default to first populated data type.
  • 3.4.03: Enabled pasting of additional fields into interval data tables [OD87010238]
  • 3.4.03: Autosave fails if user cannot write to the Application Data Folder. [OD87010231]
  • 3.4.02: Wellpath browser occasionally shows duplicate first row.
  • 3.4.02: In the Well Browser, the Search and Replace tool can now be used with datum elevations [OD87010216]
  • 3.4.02: CM licence manager was making a security check, requiring an internet connection, every 5 minutes. [OD87010214]
  • 3.4.01: The list of open windows within the ODM window (under the Window menu option) no longer includes a blank entry.
  • 3.4.01: When using a CopyMinder Network Licence, the unexpected 641 error (maximum number of users already reached) has been corrected. [OD87010207]

ODM 3.4.06 Released 8th July 2008

  • Miscellaneous: "Object variable or With block variable not set" error no longer returned when closing maximised Log Browser window.
  • Miscellaneous: Data browser now handles -ve depths for outcrops correctly.
  • Import/Export: External ASCII grids with depths in feet were not importing correctly.
  • Import/Export: Log importer now handles Petrel well trace files.
  • OpenWorks Link: When re-importing well headers without any other data, the ODM Well Properties may not be updated until after re-starting ODM.
  • OpenWorks Link: Fixed bug, where re-importing wellpath data may occasionally fail.
  • OpenWorks Link: Default behaviour when importing well status is now 'prompt' (previously 'skip')
  • SBUGS link: Now correctly determines the type of well (i.e. downhole or outcrop) and takes action accordingly.
  • Charts: Top/base depths reversed when selecting depth limits from interval.
  • Charts: Macros added to user-defined headings in charts. Use $XX_min, $XX_max, $XX_units, $XX_title, $XX_caption.

ODM 3.4.05 Released 18 April 2008:

  • WSM: Wide-ranging enhancements and bug fixes
  • Charts: Lithology pattern is no longer lost in tie when 'extend across panels' is left unticked.
  • Charts: Cross-plot no longer causes ODM to crash with a 'subscript out of range' error when plotting data for many wells. [OD87010257]
  • Charts: Using a decimal point in Chart Preferences causes ODM to crash if the PC's regional settings require a comma for the decimal separator [OD87010279]
  • Charts: Improved interface and various bug fixes for stacked log curves (can now handle more than 6 curves)
  • Charts: Fixed spurious 'auto-save' message received after using Chart > Save as...
  • Data table: Flag empty data types within drop-down list. If last-selected data type is empty, default to first populated data type.
  • Dictionaries: When cloning a dictionary, parent/surface information now retained. [OD87010280]
  • Import/Export: Well Symbol dictionaries are no longer deleted when 'replace' option selected on importing dictionaries (caused all existing well status information to be lost) [OD87010254]
  • Import/Export: LAS file fails to import when PC's regional settings use a comma for the decimal separator. [OD87010260]
  • Import/Export: LAS file import occasionally fails when depth values are reversed and merging with existing data [OD87010273]
  • Import/Export: Import of well headers no longer fails with runtime error 3021 "No current record" when importing into an empty project. [OD87010278]
  • Import/Export: Export of log data to ASCII or LAS file occasionally shows NULL value at first depth point [OD87010291]
  • Import/Export: When using the Single-Well ASCII import, ODM will now accept LAS files containing ~C (rather than ~CURVE) as data block header. (The log file importer already recognises ~C).
  • Import/Export: When exporting an ODM project, selection of export folder fails if current database does not have a parent folder
  • Import/Export: Importing a zmap polygon file problematic when file includes a z-column. Now fixed.
  • Miscellaneous: New Dictionary dialogue no longer opens behind the Graphics Dictionaries form.
  • Miscellaneous: Search-and-replace now working for Operator field in Wells Browser
  • Miscellaneous: Errant behaviour in well-list filter (or even occasional fatal SOOR) fixed [OD87010274]
  • Miscellaneous: Windows list no longer disappears for Chart, map or data tables [OD87010299]
  • OpenWorks link: Fix for export problem with pick max depth values (seen if min value zero).
  • OpenWorks link: Well coordinates (lat/long and x/y) where not importing correctly when PC's locale used a comma as the decimal separator.

ODM 3.4.04 Not Released

ODM 3.4.03 Released 28 January 2008:

  • Maps: Resetting map extents occasionally resulted in ODM crash when map in lat/long coordinate system. [OD87010233]
  • Maps: New option to apply well label format to a sub-set of map wells
  • Charts: Improved handling of comment formatting in data panels
  • Charts: "Invalid object handle" error message (received when plotting detailed lithology infill) fixed. [OD87010239]
  • Charts: Added font control on depth labels in data panels
  • Charts: Fix for problem seen in some correlation charts after upgrading to ODM 3.4
  • Autosave: Autosave fails if user cannot write to the Application Data Folder. [OD87010231]
  • Miscellaneous: Enabled pasting of additional fields into interval data tables [OD87010238]
  • Import/export: Fixed "Type mismatch" error generated when PC locale is continental Europe, and using multi-well import. [OD87010237]

ODM 3.4.02 Released 15 January 2008:

  • Maps: After right-clicking a well in the map, the Well > Label options did not respond correctly. [OD87010206]
  • Charts: When deleting a chart template, the template preview is now also deleted. [OD87010209]
  • Charts: Crossplots no longer show unexpected data points when referencing sparsely-populated curves. [OD87010213]
  • Importing: Subscript-out-of-range error when importing log curves with single depth only in Single-well ASCII loader. [OD87010215]
  • Importing: Subscript-out-of-range error when importing deviation data in multi-well ASCII loader. [OD87010221]
  • Importing: Type mismatch if any datum field is empty [OD87010225]
  • Importing: TVDSS values incorrect after importing wellpath using single-well ASCII loader [OD87010228]
  • Utilities: ODM no longer crashes when using the picks-to-intervals converter. [OD87010227]
  • Well Browser: The Search and Replace tool can now be used with datum elevations [OD87010216]
  • OpenWorks Link: Final Version flag for log currves occasionally applied incorrectly (it should always mark the highest version number). [OD87010218]
  • Licence manager: CM licence manager was making a security check, requiring an internet connection, every 5 minutes. [OD87010214]
  • Wellpath browser: occasionally shows duplicate first row.

ODM 3.4.01 Released 12 December 2007

  • Maps: Cursor arrow now points to correct region when hovering over well label or scale bar in map. [OD87010117]
  • Charts: Fix to prevent ODM crashing when attempting to open a chart without a configurable printer driver available.
  • Charts: "Cannot reposition well headers based on surface seperation" error message no longer received when wells do not have long/lat surface positions specified. [OD87010185]
  • Charts: Occasional (1 chance in 500) "Subscript out of range" error (IFS.GetPoly2) seen when using colour infill on large curves (>5000 points) [OD87010195]
  • OW Link: Wells not correctly selected/de-selected for import if the mouse is dragged after clicking a check box but before releasing the mouse button. [OD87010190]
  • IP Link: IP link failed to import curves with irregular depth data. [OD87010178]
  • Utilities: Overflow error generated in Intervals to Curves utility when dealing with long wells is fixed. [OD87010198]
  • WSM Module: Production data tables listed twice under well data pop-up menu. [OD87010199]
  • WSM Module: Fix to the Well Information (well history) report
  • Well Queries: Warning message now given if user attempts to select a 'log search' from the log data selector. [OD87010194]
  • Import/Export: Well header import/export options consolidated to ensure that ODM export file can be imported directly. [OD87010197]
  • Miscellaneous: The list of open windows within the ODM window (under the Window menu option) no longer includes a blank entry.
  • Licence Manager: When using a CopyMinder Network Licence, the unexpected 641 error (maximum number of users already reached) has been corrected. [OD87010207]
  • Strat Scheme Builder: ODM crashes with runtime 424 'object required' error when selecting Tools > Analyse scheme... within the Strat Scheme Builder. [OD87010201]

ODM 3.4.00 Released 21 November 2007

Last updated: Wednesday 30 April 2008.